PRODUCTS
Tel: +86 189 6693 5266
Fax: +86 29 8263 6374
Skype: frankzhang051001
Wechat: frankzhang051001
WhatsApp: +86 189 6693 5266
QQ: 312813330
Email:
ZK60A-T5 magnesium alloy billet ZK60 magnesium alloy rod bar billet tube profile extrusion as per ASTM B107/B107M-13
ZK60A
ZK60A is a wrought magnesium base alloy containing zinc and zirconium. Increased strength is obtained by artificial aging from the as-fabricated form. ZK60A-T5 has the best combination of strength and ductility at room-temperature of the wrought magnesium alloys.
APPLICATIONS
Forgings and extrusions in ZK60A find application in high strength parts for use primarily where the service temperature is below 150°C. ZK60A forgings can be used where pressure tightness or machinability are required. That parts are dimensionally stable during and after machining is also an important design consideration.
Forgings and extrusions in ZK60A find application in high strength parts for satellites, helicopter gearboxes and rotor hubs, bicycle frames, roadwheels, missle frames and interstage fairings, brake housings and landing gear struts.
SPECIFICATIONS
ASTM B91
ASTM B107/B107M-13
CHEMICAL COMPOSITION
Zinc 4.8-6.2%
Zirconium 0.45% min
Magnesium Balance
Dimension Scope
Forgings: Max. length 1000mm, max. width 500mm, max thickness 330mm.
Extrusions: Diameter 6mm - 180mm for round bar; thickness and width 10-220mm for square/rectangular section. Length: 100mm - 6000mm
Thickness and width are inter-dependant.
HEAT TREATMENT
As-fabricated (F) forgings can be converted to the precipitation treated temper (T5) by heating to 150°C for 24 hours, followed by air cooling.
PHYSICAL PROPERTIES
Specific Gravity 1.83
Coefficient of Thermal Expansion 27.1x10 -6 K -1
Thermal Conductivity 121 Wm -1 K -1
Specific Heat 1100 Jkg -1 K -1
Electrical Resistivity 57 nΩm
Modulus of Elasticity 45GPa
Poissons Ratio 0.35
Melting Range 520-635°C
TYPICAL HARDNESS
ZK60A-T6 85 Rockwell E
ZK60A-T5 77 Rockwell E
WELDABILITY
ZK60A is not considered to be weldable by conventional techniques due to hot-shortness cracking. However, resistance welding response is excellent. Friction stir welding can be used to join ZK60A to itself and other magnesium alloys.
MACHINING
ZK60A, like all magnesium alloy forgings, machines faster than any other metal. Providing the geometry of the part allows, the limiting factor is the power and speed of the machine rather than the quality of the tool material. The power required per cubic centimeter of metal removed varies from 9 to 14 watts per minute depending on the operation.
SURFACE TREATMENT
All the normal chromating, anodizing, plating, and finishing treatments are readily applicable.
XIAN YUECHEN METAL PRODUCTS CO., LTD. (XYMCO) is one of the leading manufacturer of magnesium alloy products located in Xincheng Hi-Tech Industry Estate, Xi’an, Shaanxi, China, who is specialized in the development, manufacture and supply of magnesium alloy products worldwide included magnesium tooling plate, magnesium alloy plate, magnesium alloy sheet, magnesium alloy slab, magnesium alloy bar, magnesium alloy billet, magnesium alloy rod, magnesium alloy tube, magnesium alloy pipe, magnesium alloy profile, magnesium welding wire, magnesium alloy extrusion, magnesium alloy stamping, magnesium alloy casting, magnesium alloy forging and semi - fabricated component according to customer’s design.
We comply with the specifications:
GB5153-03, GB5154-04, AMS4377G, ASTM B90/B90M-15, MIL-DTL 32333, MIL-T-38749, QQ-M-44B, ASTM B107/B107M-13 and ASTM B91-97
Material grades: AZ31B, AZ61A, AZ80A, AZ91D, AZ41M, ZK60, AM50, AM60, ZM21, MIA, ME20M, EQ21, WE43, WE54, ZE41, etc.
Our main products and capabilities are as follows:
1. Magnesium tooling plate: Max. Thickness: 300mm; Max. Width: 2000mm; Max. Length: 6000mm
2. Magnesium alloy cast slab: Max. Size: 400 x 1000 x 3000mm
3. Magnesium alloy sheet: Min. Thickness: 0.5mm; Max. Width: 600mm; Max. Length: 2000mm
4. Magnesium cast billet: Min. Diameter 90mm; Max. Diameter: 600mm; Max. Length: 6000mm
5. Magnesium alloy extruded wire: Dia.1.0mm – 8.0mm in spool.
6. Magnesium alloy extruded rod: Min. Dia. 8mm; Max. Diameter: 450mm; Max. Length: 3000mm
7. Magnesium extrusions:
Round tube: Max. OD600mmx thickness 125mm
Square tube: 430 x 430mm
Flat bar: 920 x 160mm
U-Shape: 800 x 300mm
Rectangular: 700 x 200mm
8. Magnesium-Lithium Alloy rod, sheet, plate and tube.
Our products already were exported to USA, Japan, Israel, India, Germany, Iran, Columbia, Italy and UK. Good quality, good price and good delivery.
Looking forward to your enquiry and hope a prosperous cooperation can be established between us.
Xi'an Yuechen Metal Products Co., Ltd.
No. 2 Xinke Road, Xincheng Hi-Tech Industry Park,Xi'an 710043, Shaanxi, China
Tel: +86 189 6693 5266 Fax: +86 29 8263 6374 Skype: frankzhang051001
Wechat: frankzhang051001 WhatsApp: +86 189 6693 5266 Email: salesmanager@cnmagalloy.com
Website: www.cnmagalloy.com QQ: 312813330 陕ICP备18007848号-2 Powered by 300.cn 【MANAGER】